Calgary & Airdrie

Radon Mitigation Pricing

$1,800 covers most homes. See what's included, and check whether any add-ons apply to yours.

What's Included in the Standard Mitigation System

One fan, one suction point, and everything required to meet C-NRPP guidelines and code.

80%
About 80% of homes need zero add-ons.

$1,800 is the price you should expect to be quoted. Add-ons apply only to specific site conditions, and are listed below for transparency.

COMPLETE PACKAGE — $1,800

The complete sub-slab depressurization system we install in roughly 80% of homes: one radon fan, one suction point, drilling and prepping the basement slab, and 15 ft of piping — plus everything required under C-NRPP guidelines and local code, from site inspection through post-job verification.

Description of Work

  • Site inspection and system design
  • Pressure test (natural pressure under slab)
  • Communication test (determines fan type needed)
  • Leakage test, including backdrafting test
  • Drilling and prepping the basement slab
  • Installation of the radon fan and piping
  • Post-job inspection (pressure with fan on/off, labels, insulation, sealing)

Material & Equipment (Included)

  • Radon fan — S2 Pro / RN1 / RN2 (x1) + power cord
  • 4" Schedule 40 PVC/ABS pipe (15 ft)
  • Fernco flexible couplings (x2)
  • 90° elbow (x2) & 45° elbow (x1)
  • 4" trim ring (x1)
  • Radon decal package (x1)
  • U-tube manometer (x1)
  • Bracing kit + strapping
  • Uni-stop bushing / baseplate assembly (x1)
  • Pipe cement, primer & varmint guard

When the Price Changes (Uncommon)

For most homes, $1,800 is the final number. The soil and foundation under your slab are only visible once we drill the first suction hole, so two conditions can't be confirmed until then. We always confirm with you before any additional billable work.

  • Tight / clay soil: if the foundation beneath the slab is clay, we must drill additional holes and tunnel under the slab for adequate suction — billed at $100/hole.
  • Distance to suction point: the first 15 ft of PVC pipe is included; pipe beyond that is billed at $10/ft depending on communication test results.

Estimates only, in CAD. A final quote follows an in-person site assessment.

Estimate Your Cost

Roughly 80% of homes need nothing beyond the $1,800 package. Turn on an option only if your home has that condition.

Extra PVC Pipe Beyond 15 ft

Needed when the suction point sits farther from the fan than standard.

$10 / ft
0

Extra Suction Point

Some homes need more than one suction point for adequate depressurization.

$350 each
0

Radon Dome Sump Lid

Airtight dome lid for a sump pit. Most homes with a sump pump don't need one — only required in certain circumstances.

$300 each
0

Tight Clay Soil Treatment

Per additional hole required to tunnel under the slab in clay soil.

$100 / hole
0

Sealing Hole in Concrete Floor Under Furnace

Sealing an existing floor penetration beneath the furnace.

$150

In-Floor Heating

Extra care required when drilling and piping around in-floor heat lines.

$50

Crawl Space Vapor Barrier

Sealed 20-mil vapor barrier for homes with a crawl space. $1,000 plus one $650 pack per 500 sq ft.

$1,000 + $650 / 500 sq ft
sq ft

Fan Upgrade

Bigger isn't better. Our communication test determines the right fan for your home — an oversized fan adds negative pressure, noise, and electricity cost without improving results. Upgrades apply only to larger or more complex homes.

Want an Exact Quote?

Book a free radon test and on-site assessment — we'll confirm the real cost before any work begins.